Sprockets Gears

Sprockets Gears

Chain Drive

Chain drives are used where positive action is required. The velocity is constant to some extent. Power is transmitted, in this case over a shorter distance than in the case of belt or rope drives. Chains are made up of rigid links and of various types. They are classified as :


The wheels over which chain runs are called sprocket wheels. These wheels have projecting teeth which fit the suitable recess in the links of the chain and thus enable a positive drive to be obtained.

The pitch of the chain is defined as the distance between a hinge center of one link to the corresponding hinge center of the adjacent link. The pitch circle diameter of the chain sprocket is the diameter of the circle on which the hinge centers lie, when the chain is wrapped round the sprocket.

Quality


Sources of errors in manufacturing gears:
The gears (gear teeth) are generally made by one of the following two methods:

Contact Us

Vishwakarma Iron Works
7, Vadipura, Surenda Nagar
(Gujarat) INDIA.
Ph: 02752 - 220911
E-mail : info@viwtexpart.com